ENDURO 619032RS-ABEC5 Rubber Sealed Deep Groove Ball Bearing 17x30x7mm

Enduro Rubber Sealed Deep Groove Ball Bearings: One of the most commonly used bearings, these types are manufactured with rubber seals inserted into the outer raceway and in contact with the inner race providing protection against the ingress of moisture, dust and other foreign matter and serve to retain the pre-filled grease in the bearing. Typically found in cycle wheels and cranks.
Bearings of ABEC-5 standard are bearing designs which pass all tests, including noise testing at high speeds, extremely close tolerances for the inside diameter and outside diameter, roundness of ball, trueness of races and micro surface finishes of balls and races.
Seals can be easily removed for applications that only require 1 seal.
Benefits: Prevents moisture and dirt getting into the bearing, lubricated for life, ABEC-5 standard
Note: If your bearing has the code 6903/61903 on the races and/or seals but has an 18mm bore, then you may need a [MR183072RS]

Note: These bearings may feature 'C3' on the box, this is not in reference to internal clearance and is a manufacturer code.

Brand / Quality:

Enduro - High Quality

Inside Diameter:

17mm

Outside Diameter:

30mm

Width:

7mm

Seals / Shields:

Rubber Sealed