RHP PNP1-3/16CR Thermo Plastic Two Bolt Pillow Block Housing with 1-3/16 inch Bore Stainless Insert - Allow 2-3 Days

RHP PNP Series Thermo Plastic 2 Bolt Pillow Block Housings: Bearing units supplied with a fully sealed stainless steel bearing insert fitted in the plastic housing and also includes a grease nipple to facilitate re-lubrication. The bearing insert has 2 grub screws to allow tightening against the shaft once fitted. The inserts can be removed from the housings for future replacement as required. The Silver-Lube series is a range of corrosion-resistant bearing units specifically for use in industries where frequent thorough washdowns are necessary, optimum hygiene standards are required and good chemical resistance is important over a wide temperature range. Silver-Lube housings are made from PBT thermoplastic resin which, in addition to being non-corrodible, is resistant to detergents and a wide range of chemicals. The housings are paint and coating free which prevents chipping or flaking and have smooth surfaces to assist thorough washdowns. The Silver-Lube® bearing inserts are made from stainless steel, are provided with effective, efficient sealing arrangements and are charged with an aluminium complex, high temperature approved food grade grease as standard.
Benefits: Cost effective bearing / housing assembly, re-lubricatable, replaceable insert, grub screw fixing, food-safe and approved

Brand / Quality:

RHP - High Quality

Inside Diameter:

30.16mm = 1.187 (1-3/16) inch

Style:

PNP

Colour:

White

Bolt Hole Centres:

118.9mm